Home › Everything we make › Fitted Wardrobes › Teesside
Teesside · North East
Fitted Wardrobes in Teesside
Floor-to-ceiling wardrobes built to your wall, not to a flat-pack size.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Teesside is a county of Victorian ironworks terraces and a large stock of post-war and modern estates. That is exactly the kind of building stock a fitted wardrobe has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
We build fitted wardrobes as cabinetmakers rather than fitters: machined joints, real carcass construction, and a finish applied under workshop conditions before anything reaches your Teesside address.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Guide price | from £720 per linear metre, fitted |
|---|---|
| Lead time | 5–7 weeks from signed drawings |
| Construction | Tulipwood carcass, painted |
| Survey area | All of Teesside, including Middlesbrough, Stockton-on-Tees, Redcar, Billingham |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Teesside turns it into a fixed written quote.
Towns we cover
Other joinery for Teesside
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Fitted Wardrobes in Teesside — common questions
Can you fit around a chimney breast or a radiator?
That is one of the main reasons people go bespoke. We build the run in bays that step round the breast, and a radiator is either boxed with a ventilated grille or the run is returned short of it.
Do the doors need handles?
No. Push-to-open catches or a routed finger pull along the top edge give a completely flat front. Handles are easier to live with on heavy full-height doors, and a J-pull rail is a good middle ground.
How much hanging space do I actually need?
As a rule, one metre of double hanging holds around forty shirts or thirty jackets. Long hanging for coats and dresses needs 1,600mm of clear height; short hanging needs 1,050mm, which lets you stack two rails in the same bay. We measure what you own at survey rather than guessing.
Hinged or sliding doors?
Hinged doors give you the whole opening and full-depth shelves. Sliding doors need no swing space, which matters if the bed is close, but they lose around 100mm of internal depth to the track and you can only ever see half the wardrobe at once.
What guarantee do you give?
Ten years on workmanship. Hardware carries the manufacturer's warranty, which on good runners and hinges is usually lifetime. Finishes are guaranteed for five years against flaking or delamination in normal domestic use.
Start with a measurement
Tell us the space in Teesside — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.