Home › Everything we make › Kitchen Islands
Kitchens & utility
Kitchen Islands
A single piece of cabinetry that has to work from all four sides.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Walls in your home are rarely square and floors are rarely level. A kitchen island that is built in a workshop to a nominal size will show every millimetre of that. We survey first, scribe on site, and finish so the joint line disappears.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.
| Typical guide price | from £1,900 per linear metre, fitted |
|---|---|
| Typical lead time | 8–10 weeks from signed drawings |
| Typical construction | Solid oak or painted |
| Guarantee | 10 years on workmanship |
Guide prices are indicative. Real cost depends on the run length, ceiling height, finish and what goes inside. The indicative price tool gives you a range in about a minute, and a free survey turns it into a fixed written quote.
Where we fit kitchen islands
We survey and fit across 76 counties. Pick your area for local detail:
Often specified alongside
Straight answers
Kitchen Islands — common questions
How much clearance do I need around an island?
1,000mm minimum on every side, 1,200mm on the side with the dishwasher or oven so a door can open with someone standing there. Below 900mm and the room stops working.
Can an island take a sink or a hob?
Yes, but both need services routed through the floor, which is straightforward on a suspended floor and a much bigger job on a slab. Extraction over an island hob is the other consideration — a downdraft or a ceiling unit rather than a standard hood.
What overhang do I need for seating?
300mm of clear knee space for comfortable seating, 250mm as an absolute minimum. Any overhang beyond 300mm in stone needs steel or a bracket underneath.
Should the island match the rest of the kitchen?
It often works better in a contrasting colour or a natural timber, because it reads as a piece of furniture rather than a run of units. A different worktop on the island is a good move too.
How much storage does an island give?
A 2,000mm island holds roughly the same as three base units, more if you use full-extension pan drawers rather than cupboards. Drawers are the right answer in an island — nobody wants to kneel in the middle of a room.
Can we have sockets in the island?
Yes, and you will want them. Either a face-mounted socket in the end panel or a pop-up unit in the worktop. It needs a spur run before the floor closes up.
Is a breakfast bar the same thing?
Not quite. A breakfast bar is usually a raised section or a peninsula attached to a run. A true island is free-standing on all four sides, and every face of it has to be finished.
What worktop thickness looks right on an island?
20mm reads contemporary, 30mm reads substantial, and a mitred 60 to 100mm apron gives the slab look. The thicker the apron, the more the carcass underneath has to be set back and reinforced.
Start with a measurement
Tell us the space — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.