Home › Everything we make › Hardwood Porches
Hardwood & shopfront joinery
Hardwood Porches
Open and enclosed porches framed in structural hardwood.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Every hardwood porch we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in your home, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.
How we build it
Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Typical guide price | from £1,900 per linear metre, fitted |
|---|---|
| Typical lead time | 7-10 weeks from signed drawings |
| Typical construction | Green oak or accoya frame |
| Guarantee | 10 years on workmanship |
Guide prices are indicative. Real cost depends on the run length, ceiling height, finish and what goes inside. The indicative price tool gives you a range in about a minute, and a free survey turns it into a fixed written quote.
Where we fit hardwood porches
We survey and fit across 76 counties. Pick your area for local detail:
Often specified alongside
Hardwood Shopfronts
Traditional timber shopfronts built to the elevation, not to a standard module.
See detailShopfront Pilasters
The framing columns either side of the window, with plinth, shaft and capital.
See detailFascias & Signboards
Signboard, cornice and blocking, sized to carry the signwriting properly.
See detailStallrisers
The panelled base below the display glass, where the knocks actually land.
See detailStraight answers
Hardwood Porches — common questions
Do I need planning permission for a porch?
Often not, under permitted development, if it is under three square metres, under three metres high and more than two metres from a highway boundary. Listed buildings and conservation areas are different. Worth confirming before we cut anything.
Green oak or dried timber?
Green oak for a traditional framed porch — it is worked wet and moves as it seasons, which is expected and part of the look. Kiln-dried or accoya where the porch is enclosed and the movement would matter.
Will green oak crack?
It will check along the grain as it dries, and that is normal rather than a defect. The joints are cut and pegged to accommodate it. If visible checking would bother you, dried timber is the better choice.
Can a porch be enclosed and glazed?
Yes. Once it is enclosed it becomes a small building — the glazing, the threshold and sometimes the thermal detail all need thinking through, and permitted development limits apply more tightly.
What holds it up?
Posts on padstones or a proper base, with the frame jointed and pegged rather than screwed. The posts should never sit directly on the ground or in wet concrete.
How long does it take?
Seven to ten weeks. Framing is fast; the base and the roof covering are usually what set the programme, and they involve other trades.
Can you match the roof to my house?
We frame it to take your tile or slate and set the pitch to sit properly against the elevation. A porch roof at the wrong pitch reads as an add-on however good the joinery is.
Does the frame need treating?
Oak does not. It will silver over a few years and that is the intended finish. Other species need a finish appropriate to their durability class.
Start with a measurement
Tell us the space — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.