Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeTimber Front Doors › Carmarthenshire

Carmarthenshire · Wales

Timber Front Doors in Carmarthenshire

Solid hardwood entrance doors with modern locking and weather seals.

Carmarthenshire is a county of rendered cottages, Georgian market-town stock and dispersed farmsteads. That is exactly the kind of building stock a front door has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

Every front door we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Carmarthenshire, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.

How we build it

Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.

Finish and materials

Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.

Guide pricefrom £1,850 per linear metre, fitted
Lead time8–10 weeks from signed drawings
ConstructionAccoya or European oak
Survey areaAll of Carmarthenshire, including Carmarthen, Llanelli, Ammanford, Burry Port

Want a number now? The indicative price tool gives a range in about a minute. A free survey in Carmarthenshire turns it into a fixed written quote.

Towns we cover

Other joinery for Carmarthenshire

All joinery services in Carmarthenshire →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Timber Front Doors in Carmarthenshire — common questions

How secure is a bespoke timber door?

As secure as you specify. A multipoint lock into a reinforced frame, hinge bolts, and a three-star cylinder gives you a door that meets the standards insurers ask about. The frame fixing matters as much as the lock.

How long does a front door take?

Eight to ten weeks. The door is made, primed, glazed and finished in the workshop, and fitting takes a day. We can hang a temporary door if the opening cannot be left.

What finish lasts longest outside?

A factory-applied microporous paint system in a mid or light colour. Dark colours on a south-facing door get very hot and stress the finish. Expect to wash it annually and recoat every six to eight years.

What timber is best for a front door?

Accoya for a painted door — it is modified softwood that barely moves and carries long guarantees on the finish. European oak for a natural door, accepting it will silver unless it is maintained. Both far outlast standard softwood.

Do I need to empty the room before you fit?

Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.

Start with a measurement

Tell us the space in Carmarthenshire — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote