Home › Everything we make › Hardwood Gates › Belfast
Belfast · Northern Ireland
Hardwood Gates in Belfast
Driveway and side gates braced to stay square through a wet winter.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Belfast is a county of red-brick Victorian terraces and generous interwar suburban housing. That is exactly the kind of building stock a pair of hardwood gates has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our pair of hardwood gates work is cut to the dimensions taken from your Belfast property, so there is no packing, no filler and no gap that opens up in year two.
How we build it
Carcass work is birch ply or MR MDF depending on span and load. Face frames and doors are solid hardwood. Everything is machined on the same setting so stiles, rails and reveals line through, and shadow gaps stay parallel from one end of the run to the other.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £1,450 per linear metre, fitted |
|---|---|
| Lead time | 6-8 weeks from signed drawings |
| Construction | Iroko, stainless ironmongery |
| Survey area | All of Belfast, including Belfast, Lisburn, Holywood, Dundonald |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Belfast turns it into a fixed written quote.
Towns we cover
Other joinery for Belfast
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Hardwood Gates in Belfast — common questions
How wide can a single leaf be?
Around 1.2 metres before the leverage starts working against you. Beyond that a pair is better than one very wide leaf, both for the hardware and for the swing space.
Will they match my fencing?
We can match the boarding pattern and spacing so the gate reads as part of the run rather than as an insert. Same species matters too, since different hardwoods silver to different greys.
What stops a wooden gate dropping?
Bracing that runs from the bottom hinge upward, so the diagonal works in compression. Run it the other way and it works in tension, the joints open and the gate sags. This is the single most common fault we are called out to.
What ironmongery do you use?
Stainless or galvanised throughout, and sized generously. Gate hardware fails long before the timber does, and undersized hinges on a heavy hardwood gate will tear out.
Do you charge for the survey and drawings?
The measured survey and the quotation are free. If you want fully detailed manufacturing drawings or a 3D visual before committing, that is chargeable and the fee comes off the job if you proceed.
Start with a measurement
Tell us the space in Belfast — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.