Home › Everything we make › Hardwood Gates › Conwy
Conwy · Wales
Hardwood Gates in Conwy
Driveway and side gates braced to stay square through a wet winter.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Conwy is a county of Victorian resort terraces, stone cottages and a strong holiday-let market. That is exactly the kind of building stock a pair of hardwood gates has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Every pair of hardwood gates we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Conwy, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.
How we build it
Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Guide price | from £1,450 per linear metre, fitted |
|---|---|
| Lead time | 6-8 weeks from signed drawings |
| Construction | Iroko, stainless ironmongery |
| Survey area | All of Conwy, including Llandudno, Colwyn Bay, Conwy, Abergele |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Conwy turns it into a fixed written quote.
Towns we cover
Other joinery for Conwy
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Hardwood Gates in Conwy — common questions
Do they need finishing?
Oil or leave to silver. Paint on an exterior gate needs more maintenance than most people expect, because the bottom rail is constantly wet.
What about a gap at the bottom?
Deliberate, and important. A gate closing tight to the ground wicks moisture into the bottom rail and will rot from there upward within a few years.
Which timber for gates?
Iroko or oak. Both are naturally durable enough for exterior use without pressure treatment. Iroko is more stable and less prone to staining around fixings.
Can gates be automated?
Yes, but the frame has to be built for it from the start — automation puts continuous load on the hinge stile. Retrofitting a motor to a gate not designed for it usually ends badly.
Do I need to empty the room before you fit?
Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.
Start with a measurement
Tell us the space in Conwy — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.