Home › Everything we make › Hardwood Gates › Northumberland
Northumberland · North East
Hardwood Gates in Northumberland
Driveway and side gates braced to stay square through a wet winter.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Northumberland is a county of thick-walled stone cottages, estate housing and remote rural properties. That is exactly the kind of building stock a pair of hardwood gates has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
A pair of hardwood gates is a permanent part of the building, so it is worth setting out properly. We take the survey, agree the drawings, machine the parts in the workshop and fit in Northumberland in one visit wherever the programme allows.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Guide price | from £1,450 per linear metre, fitted |
|---|---|
| Lead time | 6-8 weeks from signed drawings |
| Construction | Iroko, stainless ironmongery |
| Survey area | All of Northumberland, including Morpeth, Alnwick, Hexham, Berwick-upon-Tweed |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Northumberland turns it into a fixed written quote.
Towns we cover
Other joinery for Northumberland
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Hardwood Gates in Northumberland — common questions
How wide can a single leaf be?
Around 1.2 metres before the leverage starts working against you. Beyond that a pair is better than one very wide leaf, both for the hardware and for the swing space.
Will they match my fencing?
We can match the boarding pattern and spacing so the gate reads as part of the run rather than as an insert. Same species matters too, since different hardwoods silver to different greys.
What stops a wooden gate dropping?
Bracing that runs from the bottom hinge upward, so the diagonal works in compression. Run it the other way and it works in tension, the joints open and the gate sags. This is the single most common fault we are called out to.
What ironmongery do you use?
Stainless or galvanised throughout, and sized generously. Gate hardware fails long before the timber does, and undersized hinges on a heavy hardwood gate will tear out.
Can you match existing joinery in the house?
Yes. We take a profile of the existing skirting, architrave or door and either match it from stock cutters or have a cutter ground so the new work runs identically. Matching an old paint colour is straightforward; matching aged oak takes a sample panel and a couple of attempts, which we build into the programme.
Start with a measurement
Tell us the space in Northumberland — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.