Home › Everything we make › Hardwood Gates › Nottinghamshire
Nottinghamshire · Midlands
Hardwood Gates in Nottinghamshire
Driveway and side gates braced to stay square through a wet winter.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Nottinghamshire is a county of red-brick Victorian terraces, mining-village stock and expanding suburban estates. That is exactly the kind of building stock a pair of hardwood gates has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
The difference between a fitted job and a fitted-looking job is the setting out. For hardwood gates in Nottinghamshire we rod the job first, so what arrives on site already accounts for the bows, the skirting and the ceiling line.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £1,450 per linear metre, fitted |
|---|---|
| Lead time | 6-8 weeks from signed drawings |
| Construction | Iroko, stainless ironmongery |
| Survey area | All of Nottinghamshire, including Nottingham, Mansfield, Newark-on-Trent, Worksop |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Nottinghamshire turns it into a fixed written quote.
Towns we cover
Other joinery for Nottinghamshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Hardwood Gates in Nottinghamshire — common questions
Do they need finishing?
Oil or leave to silver. Paint on an exterior gate needs more maintenance than most people expect, because the bottom rail is constantly wet.
What about a gap at the bottom?
Deliberate, and important. A gate closing tight to the ground wicks moisture into the bottom rail and will rot from there upward within a few years.
Which timber for gates?
Iroko or oak. Both are naturally durable enough for exterior use without pressure treatment. Iroko is more stable and less prone to staining around fixings.
Can gates be automated?
Yes, but the frame has to be built for it from the start — automation puts continuous load on the hinge stile. Retrofitting a motor to a gate not designed for it usually ends badly.
Do you charge for the survey and drawings?
The measured survey and the quotation are free. If you want fully detailed manufacturing drawings or a 3D visual before committing, that is chargeable and the fee comes off the job if you proceed.
Start with a measurement
Tell us the space in Nottinghamshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.