Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeHardwood Porches › Nottinghamshire

Nottinghamshire · Midlands

Hardwood Porches in Nottinghamshire

Open and enclosed porches framed in structural hardwood.

Nottinghamshire is a county of red-brick Victorian terraces, mining-village stock and expanding suburban estates. That is exactly the kind of building stock a hardwood porch has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

Every hardwood porch we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Nottinghamshire, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.

How we build it

Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.

Finish and materials

Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.

Guide pricefrom £1,900 per linear metre, fitted
Lead time7-10 weeks from signed drawings
ConstructionGreen oak or accoya frame
Survey areaAll of Nottinghamshire, including Nottingham, Mansfield, Newark-on-Trent, Worksop

Want a number now? The indicative price tool gives a range in about a minute. A free survey in Nottinghamshire turns it into a fixed written quote.

Towns we cover

Other joinery for Nottinghamshire

All joinery services in Nottinghamshire →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Hardwood Porches in Nottinghamshire — common questions

Will green oak crack?

It will check along the grain as it dries, and that is normal rather than a defect. The joints are cut and pegged to accommodate it. If visible checking would bother you, dried timber is the better choice.

What holds it up?

Posts on padstones or a proper base, with the frame jointed and pegged rather than screwed. The posts should never sit directly on the ground or in wet concrete.

Can you match the roof to my house?

We frame it to take your tile or slate and set the pitch to sit properly against the elevation. A porch roof at the wrong pitch reads as an add-on however good the joinery is.

Do I need planning permission for a porch?

Often not, under permitted development, if it is under three square metres, under three metres high and more than two metres from a highway boundary. Listed buildings and conservation areas are different. Worth confirming before we cut anything.

What guarantee do you give?

Ten years on workmanship. Hardware carries the manufacturer's warranty, which on good runners and hinges is usually lifetime. Finishes are guaranteed for five years against flaking or delamination in normal domestic use.

Start with a measurement

Tell us the space in Nottinghamshire — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote