Home › Everything we make › Bespoke Internal Doors › West Midlands
West Midlands · Midlands
Bespoke Internal Doors in West Midlands
Doors made to the opening you have, not the opening a merchant stocks.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
West Midlands is a county of Victorian back-to-back terraces, vast interwar semi estates and 1960s tower blocks. That is exactly the kind of building stock a set of internal doors has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
The difference between a fitted job and a fitted-looking job is the setting out. For bespoke internal doors in West Midlands we rod the job first, so what arrives on site already accounts for the bows, the skirting and the ceiling line.
How we build it
Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Guide price | from £640 per linear metre, fitted |
|---|---|
| Lead time | 6–8 weeks from signed drawings |
| Construction | Engineered oak or paint-grade |
| Survey area | All of West Midlands, including Birmingham, Coventry, Wolverhampton, Solihull |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in West Midlands turns it into a fixed written quote.
Towns we cover
Other joinery for West Midlands
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Bespoke Internal Doors in West Midlands — common questions
Why not just buy a standard door?
If your opening matches a stock size, do. Period houses rarely do — original openings are frequently 30 to 80mm off any standard, and cutting a stock door down that far removes the stile and weakens it.
Do bespoke doors have to be solid timber?
No, and often they should not be. An engineered core with a solid hardwood lipping and a veneered or paint-grade face is far more stable across a heated house than solid timber, and it will not twist.
Can a door be glazed?
Yes. Obscure or clear glazing into a moulded frame. Any glass in a door below 1,500mm from floor level must be safety glass to Part N — we specify it as standard.
How much bigger than the opening should the door be?
The door is made to the frame, not the opening. We survey the frame, check it for square and wind, and make the door to suit with a 3mm gap on the sides and top and a floor gap to match your finished flooring.
Can you match existing joinery in the house?
Yes. We take a profile of the existing skirting, architrave or door and either match it from stock cutters or have a cutter ground so the new work runs identically. Matching an old paint colour is straightforward; matching aged oak takes a sample panel and a couple of attempts, which we build into the programme.
Start with a measurement
Tell us the space in West Midlands — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.