Home › Everything we make › Bespoke Internal Doors › Wrexham
Wrexham · Wales
Bespoke Internal Doors in Wrexham
Doors made to the opening you have, not the opening a merchant stocks.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Wrexham is a county of brick terraces, former colliery housing and expanding modern estates. That is exactly the kind of building stock a set of internal doors has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our set of internal doors work is cut to the dimensions taken from your Wrexham property, so there is no packing, no filler and no gap that opens up in year two.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £640 per linear metre, fitted |
|---|---|
| Lead time | 6–8 weeks from signed drawings |
| Construction | Engineered oak or paint-grade |
| Survey area | All of Wrexham, including Wrexham, Ruabon, Chirk, Rhosllanerchrugog |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Wrexham turns it into a fixed written quote.
Towns we cover
Other joinery for Wrexham
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Bespoke Internal Doors in Wrexham — common questions
How much bigger than the opening should the door be?
The door is made to the frame, not the opening. We survey the frame, check it for square and wind, and make the door to suit with a 3mm gap on the sides and top and a floor gap to match your finished flooring.
Why not just buy a standard door?
If your opening matches a stock size, do. Period houses rarely do — original openings are frequently 30 to 80mm off any standard, and cutting a stock door down that far removes the stile and weakens it.
Do bespoke doors have to be solid timber?
No, and often they should not be. An engineered core with a solid hardwood lipping and a veneered or paint-grade face is far more stable across a heated house than solid timber, and it will not twist.
Can a door be glazed?
Yes. Obscure or clear glazing into a moulded frame. Any glass in a door below 1,500mm from floor level must be safety glass to Part N — we specify it as standard.
Do I need to empty the room before you fit?
Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.
Start with a measurement
Tell us the space in Wrexham — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.