Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeKitchen Islands › Highland

Highland · Scotland

Kitchen Islands in Highland

A single piece of cabinetry that has to work from all four sides.

Highland is a county of rendered stone croft houses and modern kit homes across a very wide area. That is exactly the kind of building stock a kitchen island has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

Walls in Highland are rarely square and floors are rarely level. A kitchen island that is built in a workshop to a nominal size will show every millimetre of that. We survey first, scribe on site, and finish so the joint line disappears.

How we build it

Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.

Finish and materials

Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.

Guide pricefrom £1,900 per linear metre, fitted
Lead time8–10 weeks from signed drawings
ConstructionSolid oak or painted
Survey areaAll of Highland, including Inverness, Fort William, Nairn, Thurso

Want a number now? The indicative price tool gives a range in about a minute. A free survey in Highland turns it into a fixed written quote.

Towns we cover

Other joinery for Highland

All joinery services in Highland →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Kitchen Islands in Highland — common questions

How much storage does an island give?

A 2,000mm island holds roughly the same as three base units, more if you use full-extension pan drawers rather than cupboards. Drawers are the right answer in an island — nobody wants to kneel in the middle of a room.

Is a breakfast bar the same thing?

Not quite. A breakfast bar is usually a raised section or a peninsula attached to a run. A true island is free-standing on all four sides, and every face of it has to be finished.

How much clearance do I need around an island?

1,000mm minimum on every side, 1,200mm on the side with the dishwasher or oven so a door can open with someone standing there. Below 900mm and the room stops working.

What overhang do I need for seating?

300mm of clear knee space for comfortable seating, 250mm as an absolute minimum. Any overhang beyond 300mm in stone needs steel or a bracket underneath.

What guarantee do you give?

Ten years on workmanship. Hardware carries the manufacturer's warranty, which on good runners and hinges is usually lifetime. Finishes are guaranteed for five years against flaking or delamination in normal domestic use.

Start with a measurement

Tell us the space in Highland — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote