Home › Everything we make › Skirting, Architrave & Mouldings › North Yorkshire
North Yorkshire · Yorkshire
Skirting, Architrave & Mouldings in North Yorkshire
Profiles matched to the originals and run to length, mitres cut on site.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
North Yorkshire is a county of limestone and sandstone cottages, Georgian York townhouses and rural farmhouses. That is exactly the kind of building stock a set of mouldings has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our set of mouldings work is cut to the dimensions taken from your North Yorkshire property, so there is no packing, no filler and no gap that opens up in year two.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £140 per linear metre, fitted |
|---|---|
| Lead time | 2–4 weeks from signed drawings |
| Construction | Primed softwood or MDF |
| Survey area | All of North Yorkshire, including York, Harrogate, Scarborough, Northallerton |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in North Yorkshire turns it into a fixed written quote.
Towns we cover
Other joinery for North Yorkshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Skirting, Architrave & Mouldings in North Yorkshire — common questions
Do you fit or supply only?
Either. Supply-only is straightforward for a competent joiner or a confident DIYer. We fit where the mitres are complex, the walls are out, or the profile is large enough that a bad joint would show.
Can you run picture rails and coving too?
Timber and MDF picture rails and dado rails, yes. Plaster coving and cornice is a plasterer's trade and we work alongside them rather than supplying it.
Can you supply long lengths without joints?
Up to 4.2m in MDF and around 3m in solid timber as standard. Beyond that we scarf-joint rather than butt, so the joint closes invisibly under paint.
What height should skirting be?
It should relate to the ceiling. In a 2.4m room, 145mm to 170mm looks right. In a 3m Victorian room, 220mm and above. Skirting that is too short is the commonest mistake in a period refurbishment.
What guarantee do you give?
Ten years on workmanship. Hardware carries the manufacturer's warranty, which on good runners and hinges is usually lifetime. Finishes are guaranteed for five years against flaking or delamination in normal domestic use.
Start with a measurement
Tell us the space in North Yorkshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.