Home › Everything we make › Pantries & Larders › Bristol
Bristol · South West
Pantries & Larders in Bristol
Full-height larder with pull-outs, spice racks and a proper worktop inside.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Bristol is a county of dense Georgian and Victorian terraces on steep ground where every floor has a fall. That is exactly the kind of building stock a pantry has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Every pantry we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Bristol, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.
| Guide price | from £1,250 per linear metre, fitted |
|---|---|
| Lead time | 8–10 weeks from signed drawings |
| Construction | Painted with oak interior |
| Survey area | All of Bristol, including Clifton, Bedminster, Redland, Bishopston |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Bristol turns it into a fixed written quote.
Towns we cover
Other joinery for Bristol
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Pantries & Larders in Bristol — common questions
Should the larder have a power socket?
Yes, at the back of the internal worktop. A larder with a socket becomes a breakfast station and permanently removes the small appliances from your worktops.
Can a larder be cool without refrigeration?
Only with an external air vent and a north-facing wall, which is rare in a modern house. Most larders today are ambient storage — plan for a fridge for anything perishable.
Can you build a larder into an existing kitchen?
Usually yes, by replacing two base units and the wall units above with a single full-height run. The main constraints are the ceiling height and whether there is a soffit or a pipe boxing in the way.
How wide does a larder need to be?
600mm gets you shelves and a small worktop. 900mm to 1,200mm is where it becomes genuinely useful — you can put the toaster and the kettle inside and shut the door on them. Double doors that fold flat against the sides are worth the extra.
Do you charge for the survey and drawings?
The measured survey and the quotation are free. If you want fully detailed manufacturing drawings or a 3D visual before committing, that is chargeable and the fee comes off the job if you proceed.
Start with a measurement
Tell us the space in Bristol — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.