Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makePantries & Larders › Merseyside

Merseyside · North West

Pantries & Larders in Merseyside

Full-height larder with pull-outs, spice racks and a proper worktop inside.

Merseyside is a county of Georgian and Victorian townhouses, terraced streets and post-war regeneration stock. That is exactly the kind of building stock a pantry has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

Walls in Merseyside are rarely square and floors are rarely level. A pantry that is built in a workshop to a nominal size will show every millimetre of that. We survey first, scribe on site, and finish so the joint line disappears.

How we build it

Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.

Finish and materials

Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.

Guide pricefrom £1,250 per linear metre, fitted
Lead time8–10 weeks from signed drawings
ConstructionPainted with oak interior
Survey areaAll of Merseyside, including Liverpool, St Helens, Southport, Birkenhead

Want a number now? The indicative price tool gives a range in about a minute. A free survey in Merseyside turns it into a fixed written quote.

Towns we cover

Other joinery for Merseyside

All joinery services in Merseyside →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Pantries & Larders in Merseyside — common questions

Should the larder have a power socket?

Yes, at the back of the internal worktop. A larder with a socket becomes a breakfast station and permanently removes the small appliances from your worktops.

Can a larder be cool without refrigeration?

Only with an external air vent and a north-facing wall, which is rare in a modern house. Most larders today are ambient storage — plan for a fridge for anything perishable.

Can you build a larder into an existing kitchen?

Usually yes, by replacing two base units and the wall units above with a single full-height run. The main constraints are the ceiling height and whether there is a soffit or a pipe boxing in the way.

How wide does a larder need to be?

600mm gets you shelves and a small worktop. 900mm to 1,200mm is where it becomes genuinely useful — you can put the toaster and the kettle inside and shut the door on them. Double doors that fold flat against the sides are worth the extra.

Is bespoke joinery more expensive than a fitted furniture chain?

On a like-for-like specification it is usually comparable, and often less. Chains price a standard carcass and then charge for every deviation. A bespoke maker prices the actual room once. Where bespoke does cost more is in the materials — solid hardwood and sprayed finishes cost more than foil-wrapped board, and they last a great deal longer.

Start with a measurement

Tell us the space in Merseyside — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote