Home › Everything we make › Fascias & Signboards › Ceredigion
Ceredigion · Wales
Fascias & Signboards in Ceredigion
Signboard, cornice and blocking, sized to carry the signwriting properly.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Ceredigion is a county of colour-washed coastal terraces and remote stone farmhouses. That is exactly the kind of building stock a shopfront fascia has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our shopfront fascia work is cut to the dimensions taken from your Ceredigion property, so there is no packing, no filler and no gap that opens up in year two.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £620 per linear metre, fitted |
|---|---|
| Lead time | 5-7 weeks from signed drawings |
| Construction | Accoya, painted |
| Survey area | All of Ceredigion, including Aberystwyth, Cardigan, Lampeter, Aberaeron |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Ceredigion turns it into a fixed written quote.
Towns we cover
Other joinery for Ceredigion
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Fascias & Signboards in Ceredigion — common questions
How deep should a fascia be?
Deep enough that the signwriting has margin above and below — typically 350 to 500mm on a standard frontage. A shallow fascia forces cramped lettering and is the most common reason a new shopfront looks wrong.
What is the cornice for?
It throws water off the face of the fascia. Remove it and the signboard gets a permanent wet stripe. On a period frontage it is also the element that ties the shopfront to the building above.
What timber for a painted fascia?
Accoya. It holds paint far longer than softwood because it barely moves with humidity, and paint failure on a fascia is almost always the substrate moving underneath it.
How is the fascia ventilated?
We leave a drained and ventilated cavity behind the board so any moisture that gets past the front face can dry. Sealing a fascia tight to the wall traps water against it.
What guarantee do you give?
Ten years on workmanship. Hardware carries the manufacturer's warranty, which on good runners and hinges is usually lifetime. Finishes are guaranteed for five years against flaking or delamination in normal domestic use.
Start with a measurement
Tell us the space in Ceredigion — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.