Home › Everything we make › Fascias & Signboards › Tyne and Wear
Tyne and Wear · North East
Fascias & Signboards in Tyne and Wear
Signboard, cornice and blocking, sized to carry the signwriting properly.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Tyne and Wear is a county of tyneside flats, Victorian terraces and extensive post-war estate housing. That is exactly the kind of building stock a shopfront fascia has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our shopfront fascia work is cut to the dimensions taken from your Tyne and Wear property, so there is no packing, no filler and no gap that opens up in year two.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.
| Guide price | from £620 per linear metre, fitted |
|---|---|
| Lead time | 5-7 weeks from signed drawings |
| Construction | Accoya, painted |
| Survey area | All of Tyne and Wear, including Newcastle upon Tyne, Sunderland, Gateshead, South Shields |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Tyne and Wear turns it into a fixed written quote.
Towns we cover
Other joinery for Tyne and Wear
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Fascias & Signboards in Tyne and Wear — common questions
Can a fascia carry illuminated signage?
Yes, if it is built to. We set solid blocking behind the board where the fixings and the cable run will land, rather than leaving the sign company to fix into a thin panel.
Do I need consent to change a fascia?
Advertisement consent is usually needed for the sign itself, and in a conservation area the fascia joinery may need planning permission too. Worth checking before ordering, not after.
Can you fit a fascia to a curved frontage?
Yes, laminated to the radius taken off the survey. A fascia bent on site against its will opens at the joints within a season.
Can the old fascia be repaired instead?
If the rot is local and the mouldings are sound, we splice in new hardwood and re-profile it. If the board is delaminating or the blocking has gone, replacement is cheaper than repeated repairs.
How do I pay, and when?
A deposit at order to cover materials, a stage payment when the work leaves the workshop, and the balance on completion after you have inspected the fit. Everything is written into the quotation before you commit.
Start with a measurement
Tell us the space in Tyne and Wear — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.