Home › Everything we make › Shopfront Pilasters › Hampshire
Hampshire · South East
Shopfront Pilasters in Hampshire
The framing columns either side of the window, with plinth, shaft and capital.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Hampshire is a county of Georgian naval-town housing, thatched village cottages and extensive modern estates. That is exactly the kind of building stock a pair of shopfront pilasters has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our pair of shopfront pilasters work is cut to the dimensions taken from your Hampshire property, so there is no packing, no filler and no gap that opens up in year two.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £890 per linear metre, fitted |
|---|---|
| Lead time | 6-8 weeks from signed drawings |
| Construction | Iroko, moulded and primed |
| Survey area | All of Hampshire, including Southampton, Portsmouth, Winchester, Basingstoke |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Hampshire turns it into a fixed written quote.
Towns we cover
Other joinery for Hampshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Shopfront Pilasters in Hampshire — common questions
What stops a pilaster rotting at the base?
A hardwood plinth, an end-grain seal, and a gap so it is not standing in water. Most failures are end grain wicking moisture off wet pavement, which is a detailing problem, not a timber problem.
Are console brackets part of the pilaster?
They sit at the head of it and are usually quoted separately because the carving is a different operation. Fitted together they read as one element.
What is a pilaster?
The vertical framing column at each end of a shopfront. It carries the console bracket at the top and sits on a plinth at pavement level, and its proportions set how the whole frontage reads.
What size should a pilaster be?
It depends on the bay width and storey height rather than a standard. As a rule the pilaster reads too thin below about 200mm on a normal high-street bay. We set it off the elevation drawing so it looks deliberate.
What guarantee do you give?
Ten years on workmanship. Hardware carries the manufacturer's warranty, which on good runners and hinges is usually lifetime. Finishes are guaranteed for five years against flaking or delamination in normal domestic use.
Start with a measurement
Tell us the space in Hampshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.