Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeSliding Door Wardrobes › Devon

Devon · South West

Sliding Door Wardrobes in Devon

Full-height sliding doors where a hinged door has nowhere to swing.

Devon is a county of cob and stone cottages, Georgian terraces in the cities and steep coastal conversions. That is exactly the kind of building stock a sliding-door wardrobe has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

The difference between a fitted job and a fitted-looking job is the setting out. For sliding door wardrobes in Devon we rod the job first, so what arrives on site already accounts for the bows, the skirting and the ceiling line.

How we build it

Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.

Finish and materials

Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.

Guide pricefrom £850 per linear metre, fitted
Lead time6–8 weeks from signed drawings
ConstructionPly carcass, veneered doors
Survey areaAll of Devon, including Exeter, Plymouth, Torquay, Barnstaple

Want a number now? The indicative price tool gives a range in about a minute. A free survey in Devon turns it into a fixed written quote.

Towns we cover

Other joinery for Devon

All joinery services in Devon →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Sliding Door Wardrobes in Devon — common questions

What can the door panels be made from?

Mirror, painted glass, veneered panel, painted MDF, or a framed combination of two or three. Mirror adds a lot of weight, so the gear is sized accordingly.

Can I have three doors instead of two?

Yes. Three doors on a two-track system means one bay is always covered. Three tracks gives you access to any two bays at once but pushes the carcass deeper.

How heavy can a sliding door be?

Standard domestic gear handles up to about 80kg per leaf. A full-height mirrored door can reach that on its own, which is why we specify the gear after the panel material is chosen, not before.

How much space do sliding doors take up inside?

The top track and bottom guide take roughly 100mm off the internal depth. On a 650mm carcass that still leaves comfortable square hanging; on a 550mm carcass it does not, so we would recommend hinged doors instead.

Is bespoke joinery more expensive than a fitted furniture chain?

On a like-for-like specification it is usually comparable, and often less. Chains price a standard carcass and then charge for every deviation. A bespoke maker prices the actual room once. Where bespoke does cost more is in the materials — solid hardwood and sprayed finishes cost more than foil-wrapped board, and they last a great deal longer.

Start with a measurement

Tell us the space in Devon — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote