Home › Everything we make › Sliding Door Wardrobes › West Midlands
West Midlands · Midlands
Sliding Door Wardrobes in West Midlands
Full-height sliding doors where a hinged door has nowhere to swing.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
West Midlands is a county of Victorian back-to-back terraces, vast interwar semi estates and 1960s tower blocks. That is exactly the kind of building stock a sliding-door wardrobe has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
We build sliding door wardrobes as cabinetmakers rather than fitters: machined joints, real carcass construction, and a finish applied under workshop conditions before anything reaches your West Midlands address.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £850 per linear metre, fitted |
|---|---|
| Lead time | 6–8 weeks from signed drawings |
| Construction | Ply carcass, veneered doors |
| Survey area | All of West Midlands, including Birmingham, Coventry, Wolverhampton, Solihull |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in West Midlands turns it into a fixed written quote.
Towns we cover
Other joinery for West Midlands
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Sliding Door Wardrobes in West Midlands — common questions
Can I have three doors instead of two?
Yes. Three doors on a two-track system means one bay is always covered. Three tracks gives you access to any two bays at once but pushes the carcass deeper.
How heavy can a sliding door be?
Standard domestic gear handles up to about 80kg per leaf. A full-height mirrored door can reach that on its own, which is why we specify the gear after the panel material is chosen, not before.
How much space do sliding doors take up inside?
The top track and bottom guide take roughly 100mm off the internal depth. On a 650mm carcass that still leaves comfortable square hanging; on a 550mm carcass it does not, so we would recommend hinged doors instead.
What can the door panels be made from?
Mirror, painted glass, veneered panel, painted MDF, or a framed combination of two or three. Mirror adds a lot of weight, so the gear is sized accordingly.
Do I need to empty the room before you fit?
Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.
Start with a measurement
Tell us the space in West Midlands — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.