Home › Everything we make › Staircases & Balustrades › Ayrshire
Ayrshire · Scotland
Staircases & Balustrades in Ayrshire
Cut string or closed string stairs, handrails and spindles to Part K.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Ayrshire is a county of sandstone terraces, coastal Victorian villas and rural farm properties. That is exactly the kind of building stock a staircase has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Walls in Ayrshire are rarely square and floors are rarely level. A staircase that is built in a workshop to a nominal size will show every millimetre of that. We survey first, scribe on site, and finish so the joint line disappears.
How we build it
Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Guide price | from £2,400 per linear metre, fitted |
|---|---|
| Lead time | 8–12 weeks from signed drawings |
| Construction | Oak or paint-grade |
| Survey area | All of Ayrshire, including Ayr, Kilmarnock, Irvine, Troon |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Ayrshire turns it into a fixed written quote.
Towns we cover
Other joinery for Ayrshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Staircases & Balustrades in Ayrshire — common questions
Do stairs have to meet building regulations?
Yes — Part K in England and Wales. The main constraints are a maximum 42-degree pitch, a minimum 190mm going, a maximum 220mm rise, 2,000mm headroom, and a 100mm sphere rule that no gap in the balustrade may pass. We design to these as standard.
What is a cut string stair?
One where the outer string is cut to the profile of the treads so each tread end is visible, usually with a scotia moulding beneath. It is the more refined, traditional detail. A closed string hides the tread ends behind a solid board and is simpler and cheaper.
Will the stairs creak?
Not when new. Creaks come from movement between the tread and the riser as the timber shrinks. We glue and block every tread-riser joint and wedge the housings, which is what prevents it.
Can the space under the new stair be used?
Yes, and it should be designed in from the start rather than added later. See our under-stairs storage service.
Do I need to empty the room before you fit?
Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.
Start with a measurement
Tell us the space in Ayrshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.