Home › Everything we make › Staircases & Balustrades › Greater London
Greater London · London
Staircases & Balustrades in Greater London
Cut string or closed string stairs, handrails and spindles to Part K.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Greater London is a county of Victorian and Edwardian terraces, Georgian townhouses and post-war conversions, where no two chimney alcoves are the same width. That is exactly the kind of building stock a staircase has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Walls in Greater London are rarely square and floors are rarely level. A staircase that is built in a workshop to a nominal size will show every millimetre of that. We survey first, scribe on site, and finish so the joint line disappears.
How we build it
Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £2,400 per linear metre, fitted |
|---|---|
| Lead time | 8–12 weeks from signed drawings |
| Construction | Oak or paint-grade |
| Survey area | All of Greater London, including Camden, Islington, Hackney, Wandsworth |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Greater London turns it into a fixed written quote.
Towns we cover
Other joinery for Greater London
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Staircases & Balustrades in Greater London — common questions
Will the stairs creak?
Not when new. Creaks come from movement between the tread and the riser as the timber shrinks. We glue and block every tread-riser joint and wedge the housings, which is what prevents it.
Can the space under the new stair be used?
Yes, and it should be designed in from the start rather than added later. See our under-stairs storage service.
Do stairs have to meet building regulations?
Yes — Part K in England and Wales. The main constraints are a maximum 42-degree pitch, a minimum 190mm going, a maximum 220mm rise, 2,000mm headroom, and a 100mm sphere rule that no gap in the balustrade may pass. We design to these as standard.
What is a cut string stair?
One where the outer string is cut to the profile of the treads so each tread end is visible, usually with a scotia moulding beneath. It is the more refined, traditional detail. A closed string hides the tread ends behind a solid board and is simpler and cheaper.
What guarantee do you give?
Ten years on workmanship. Hardware carries the manufacturer's warranty, which on good runners and hinges is usually lifetime. Finishes are guaranteed for five years against flaking or delamination in normal domestic use.
Start with a measurement
Tell us the space in Greater London — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.