Home › Everything we make › Staircases & Balustrades › Kent
Kent · South East
Staircases & Balustrades in Kent
Cut string or closed string stairs, handrails and spindles to Part K.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Kent is a county of weatherboarded cottages, Victorian coastal terraces and large post-war suburbs. That is exactly the kind of building stock a staircase has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our staircase work is cut to the dimensions taken from your Kent property, so there is no packing, no filler and no gap that opens up in year two.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.
| Guide price | from £2,400 per linear metre, fitted |
|---|---|
| Lead time | 8–12 weeks from signed drawings |
| Construction | Oak or paint-grade |
| Survey area | All of Kent, including Maidstone, Canterbury, Tunbridge Wells, Ashford |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Kent turns it into a fixed written quote.
Towns we cover
Other joinery for Kent
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Staircases & Balustrades in Kent — common questions
Will the stairs creak?
Not when new. Creaks come from movement between the tread and the riser as the timber shrinks. We glue and block every tread-riser joint and wedge the housings, which is what prevents it.
Can the space under the new stair be used?
Yes, and it should be designed in from the start rather than added later. See our under-stairs storage service.
Do stairs have to meet building regulations?
Yes — Part K in England and Wales. The main constraints are a maximum 42-degree pitch, a minimum 190mm going, a maximum 220mm rise, 2,000mm headroom, and a 100mm sphere rule that no gap in the balustrade may pass. We design to these as standard.
What is a cut string stair?
One where the outer string is cut to the profile of the treads so each tread end is visible, usually with a scotia moulding beneath. It is the more refined, traditional detail. A closed string hides the tread ends behind a solid board and is simpler and cheaper.
Do I need to empty the room before you fit?
Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.
Start with a measurement
Tell us the space in Kent — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.