Home › Everything we make › Timber Cladding › Derbyshire
Derbyshire · Midlands
Timber Cladding in Derbyshire
Larch, cedar or thermowood rainscreen on a ventilated batten cavity.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Derbyshire is a county of gritstone cottages in the Peak, Victorian mill housing and large modern estates. That is exactly the kind of building stock a run of timber cladding has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
The difference between a fitted job and a fitted-looking job is the setting out. For timber cladding in Derbyshire we rod the job first, so what arrives on site already accounts for the bows, the skirting and the ceiling line.
How we build it
Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £190 per linear metre, fitted |
|---|---|
| Lead time | 3–5 weeks from signed drawings |
| Construction | Siberian larch |
| Survey area | All of Derbyshire, including Derby, Chesterfield, Buxton, Matlock |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Derbyshire turns it into a fixed written quote.
Towns we cover
Other joinery for Derbyshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Timber Cladding in Derbyshire — common questions
Can I clad over existing render or brick?
Yes, provided the substrate is sound and the wall can take the batten fixings. It is a common way to update a tired elevation and adds a ventilated layer that helps the wall dry.
Which timber should I use for cladding?
Siberian larch for durability and value; western red cedar for stability and a finer grain at a higher price; thermowood for good dimensional stability on a budget. All three can be left to silver or kept in colour with a UV-stable oil.
How is it fixed?
Stainless steel ring-shank nails or screws — never galvanised, which reacts with the tannin in larch and cedar and leaves black streaks down the elevation. Secret-fixed profiles are available where you want no visible fixings.
What board profile should I choose?
Shiplap and feather edge are traditional and shed water well. Square-edge with a shadow gap reads contemporary and needs a good membrane behind it because it is not weather-tight on its own. Vertical boards drain faster than horizontal.
Do you work with architects and builders?
Regularly. We can work to your drawings and specification, price from a schedule, and co-ordinate with the main contractor's programme. We are equally happy dealing directly with a homeowner from a rough sketch.
Start with a measurement
Tell us the space in Derbyshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.