Home › Everything we make › Timber Cladding › Kent
Kent · South East
Timber Cladding in Kent
Larch, cedar or thermowood rainscreen on a ventilated batten cavity.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Kent is a county of weatherboarded cottages, Victorian coastal terraces and large post-war suburbs. That is exactly the kind of building stock a run of timber cladding has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
The difference between a fitted job and a fitted-looking job is the setting out. For timber cladding in Kent we rod the job first, so what arrives on site already accounts for the bows, the skirting and the ceiling line.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £190 per linear metre, fitted |
|---|---|
| Lead time | 3–5 weeks from signed drawings |
| Construction | Siberian larch |
| Survey area | All of Kent, including Maidstone, Canterbury, Tunbridge Wells, Ashford |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Kent turns it into a fixed written quote.
Towns we cover
Other joinery for Kent
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Timber Cladding in Kent — common questions
How long will it last?
Larch and cedar in a well-detailed, ventilated rainscreen give thirty to fifty years. The failures we are called to are nearly always detailing — no cavity, wrong fixings, or boards taken to ground level with no clearance.
Does cladding need a cavity behind it?
Yes. A ventilated and drained cavity on treated battens over a breather membrane is what keeps the boards dry from both sides. Cladding fixed straight to a wall will cup, and the wall behind will stay wet.
Will it all go grey?
If untreated, yes, and unevenly at first — the sheltered areas silver more slowly than the exposed ones. It evens out over two to three years. If you want it to stay honey-coloured, expect to recoat every two to three years.
Is timber cladding a fire risk?
On a domestic house below 11m, standard timber cladding is generally acceptable, subject to distance from the boundary. Above 11m or on flats, non-combustible materials are required. We check the position against current regulations before quoting.
Do I need to empty the room before you fit?
Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.
Start with a measurement
Tell us the space in Kent — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.