Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeTimber Cladding › West Sussex

West Sussex · South East

Timber Cladding in West Sussex

Larch, cedar or thermowood rainscreen on a ventilated batten cavity.

West Sussex is a county of flint and tile-hung cottages inland with Regency and Victorian stock on the coast. That is exactly the kind of building stock a run of timber cladding has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

Every run of timber cladding we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in West Sussex, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.

How we build it

Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.

Finish and materials

Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.

Guide pricefrom £190 per linear metre, fitted
Lead time3–5 weeks from signed drawings
ConstructionSiberian larch
Survey areaAll of West Sussex, including Crawley, Worthing, Horsham, Chichester

Want a number now? The indicative price tool gives a range in about a minute. A free survey in West Sussex turns it into a fixed written quote.

Towns we cover

Other joinery for West Sussex

All joinery services in West Sussex →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Timber Cladding in West Sussex — common questions

Will it all go grey?

If untreated, yes, and unevenly at first — the sheltered areas silver more slowly than the exposed ones. It evens out over two to three years. If you want it to stay honey-coloured, expect to recoat every two to three years.

Is timber cladding a fire risk?

On a domestic house below 11m, standard timber cladding is generally acceptable, subject to distance from the boundary. Above 11m or on flats, non-combustible materials are required. We check the position against current regulations before quoting.

How long will it last?

Larch and cedar in a well-detailed, ventilated rainscreen give thirty to fifty years. The failures we are called to are nearly always detailing — no cavity, wrong fixings, or boards taken to ground level with no clearance.

Does cladding need a cavity behind it?

Yes. A ventilated and drained cavity on treated battens over a breather membrane is what keeps the boards dry from both sides. Cladding fixed straight to a wall will cup, and the wall behind will stay wet.

Is bespoke joinery more expensive than a fitted furniture chain?

On a like-for-like specification it is usually comparable, and often less. Chains price a standard carcass and then charge for every deviation. A bespoke maker prices the actual room once. Where bespoke does cost more is in the materials — solid hardwood and sprayed finishes cost more than foil-wrapped board, and they last a great deal longer.

Start with a measurement

Tell us the space in West Sussex — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote