Home › Everything we make › Timber Cladding › Wrexham
Wrexham · Wales
Timber Cladding in Wrexham
Larch, cedar or thermowood rainscreen on a ventilated batten cavity.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Wrexham is a county of brick terraces, former colliery housing and expanding modern estates. That is exactly the kind of building stock a run of timber cladding has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Every run of timber cladding we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Wrexham, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.
| Guide price | from £190 per linear metre, fitted |
|---|---|
| Lead time | 3–5 weeks from signed drawings |
| Construction | Siberian larch |
| Survey area | All of Wrexham, including Wrexham, Ruabon, Chirk, Rhosllanerchrugog |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Wrexham turns it into a fixed written quote.
Towns we cover
Other joinery for Wrexham
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Timber Cladding in Wrexham — common questions
How is it fixed?
Stainless steel ring-shank nails or screws — never galvanised, which reacts with the tannin in larch and cedar and leaves black streaks down the elevation. Secret-fixed profiles are available where you want no visible fixings.
What board profile should I choose?
Shiplap and feather edge are traditional and shed water well. Square-edge with a shadow gap reads contemporary and needs a good membrane behind it because it is not weather-tight on its own. Vertical boards drain faster than horizontal.
Can I clad over existing render or brick?
Yes, provided the substrate is sound and the wall can take the batten fixings. It is a common way to update a tired elevation and adds a ventilated layer that helps the wall dry.
Which timber should I use for cladding?
Siberian larch for durability and value; western red cedar for stability and a finer grain at a higher price; thermowood for good dimensional stability on a budget. All three can be left to silver or kept in colour with a UV-stable oil.
Is bespoke joinery more expensive than a fitted furniture chain?
On a like-for-like specification it is usually comparable, and often less. Chains price a standard carcass and then charge for every deviation. A bespoke maker prices the actual room once. Where bespoke does cost more is in the materials — solid hardwood and sprayed finishes cost more than foil-wrapped board, and they last a great deal longer.
Start with a measurement
Tell us the space in Wrexham — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.