Home › Everything we make › Under-Stairs Storage › Flintshire
Flintshire · Wales
Under-Stairs Storage in Flintshire
Pull-out drawers and cupboards that use the awkward triangle under a flight.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Flintshire is a county of brick and rendered village housing with extensive modern development. That is exactly the kind of building stock a run of under-stair storage has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Every run of under-stair storage we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Flintshire, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Guide price | from £950 per linear metre, fitted |
|---|---|
| Lead time | 4–6 weeks from signed drawings |
| Construction | Birch ply |
| Survey area | All of Flintshire, including Mold, Flint, Buckley, Connah's Quay |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Flintshire turns it into a fixed written quote.
Towns we cover
Other joinery for Flintshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Under-Stairs Storage in Flintshire — common questions
How heavy can a pull-out unit be?
The runners we use are rated to 70kg per pair loaded. A tall pull-out full of coats and boots will get close to that, so the carcass is built in 18mm ply rather than MDF.
Will it work on a winder or curved stair?
Yes, but it takes more setting out and each unit is a different shape. Expect the price per metre to be higher than a straight flight.
Do you have to remove the existing cupboard door?
Usually yes. The standard builder's door under a stair wastes most of the volume behind it. Replacing it with a bank of pull-outs typically doubles what you can store and reach.
Can the meter or consumer unit stay accessible?
It has to. We build a removable or hinged access panel so the meter reader and an electrician can get to it without dismantling the joinery.
What guarantee do you give?
Ten years on workmanship. Hardware carries the manufacturer's warranty, which on good runners and hinges is usually lifetime. Finishes are guaranteed for five years against flaking or delamination in normal domestic use.
Start with a measurement
Tell us the space in Flintshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.