Home › Everything we make › Under-Stairs Storage › Northamptonshire
Northamptonshire · East Midlands
Under-Stairs Storage in Northamptonshire
Pull-out drawers and cupboards that use the awkward triangle under a flight.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Northamptonshire is a county of ironstone villages, Victorian boot-and-shoe terraces and large new settlements. That is exactly the kind of building stock a run of under-stair storage has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Every run of under-stair storage we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Northamptonshire, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.
| Guide price | from £950 per linear metre, fitted |
|---|---|
| Lead time | 4–6 weeks from signed drawings |
| Construction | Birch ply |
| Survey area | All of Northamptonshire, including Northampton, Kettering, Corby, Wellingborough |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Northamptonshire turns it into a fixed written quote.
Towns we cover
Other joinery for Northamptonshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Under-Stairs Storage in Northamptonshire — common questions
How heavy can a pull-out unit be?
The runners we use are rated to 70kg per pair loaded. A tall pull-out full of coats and boots will get close to that, so the carcass is built in 18mm ply rather than MDF.
Will it work on a winder or curved stair?
Yes, but it takes more setting out and each unit is a different shape. Expect the price per metre to be higher than a straight flight.
Do you have to remove the existing cupboard door?
Usually yes. The standard builder's door under a stair wastes most of the volume behind it. Replacing it with a bank of pull-outs typically doubles what you can store and reach.
Can the meter or consumer unit stay accessible?
It has to. We build a removable or hinged access panel so the meter reader and an electrician can get to it without dismantling the joinery.
Do I need to empty the room before you fit?
Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.
Start with a measurement
Tell us the space in Northamptonshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.