Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeUnder-Stairs Storage › Vale of Glamorgan

Vale of Glamorgan · Wales

Under-Stairs Storage in Vale of Glamorgan

Pull-out drawers and cupboards that use the awkward triangle under a flight.

Vale of Glamorgan is a county of limestone cottages, Victorian seaside villas and substantial modern estates. That is exactly the kind of building stock a run of under-stair storage has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our run of under-stair storage work is cut to the dimensions taken from your Vale of Glamorgan property, so there is no packing, no filler and no gap that opens up in year two.

How we build it

Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.

Finish and materials

Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.

Guide pricefrom £950 per linear metre, fitted
Lead time4–6 weeks from signed drawings
ConstructionBirch ply
Survey areaAll of Vale of Glamorgan, including Barry, Cowbridge, Llantwit Major, Dinas Powys

Want a number now? The indicative price tool gives a range in about a minute. A free survey in Vale of Glamorgan turns it into a fixed written quote.

Towns we cover

Other joinery for Vale of Glamorgan

All joinery services in Vale of Glamorgan →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Under-Stairs Storage in Vale of Glamorgan — common questions

Can the meter or consumer unit stay accessible?

It has to. We build a removable or hinged access panel so the meter reader and an electrician can get to it without dismantling the joinery.

How heavy can a pull-out unit be?

The runners we use are rated to 70kg per pair loaded. A tall pull-out full of coats and boots will get close to that, so the carcass is built in 18mm ply rather than MDF.

Will it work on a winder or curved stair?

Yes, but it takes more setting out and each unit is a different shape. Expect the price per metre to be higher than a straight flight.

Do you have to remove the existing cupboard door?

Usually yes. The standard builder's door under a stair wastes most of the volume behind it. Replacing it with a bank of pull-outs typically doubles what you can store and reach.

Do you work with architects and builders?

Regularly. We can work to your drawings and specification, price from a schedule, and co-ordinate with the main contractor's programme. We are equally happy dealing directly with a homeowner from a rough sketch.

Start with a measurement

Tell us the space in Vale of Glamorgan — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote