Home › Everything we make › Utility Rooms › Bedfordshire
Bedfordshire · East
Utility Rooms in Bedfordshire
Appliance housing, drying racks and worktop that hides the laundry.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Bedfordshire is a county of brick-and-tile village stock alongside extensive post-war and modern estates. That is exactly the kind of building stock a utility room has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our utility room work is cut to the dimensions taken from your Bedfordshire property, so there is no packing, no filler and no gap that opens up in year two.
How we build it
Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £820 per linear metre, fitted |
|---|---|
| Lead time | 6–8 weeks from signed drawings |
| Construction | Moisture-resistant MDF |
| Survey area | All of Bedfordshire, including Luton, Bedford, Dunstable, Leighton Buzzard |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Bedfordshire turns it into a fixed written quote.
Towns we cover
Other joinery for Bedfordshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Utility Rooms in Bedfordshire — common questions
How much space does a utility actually need?
A 1,800mm run against one wall houses two machines, a sink and a small worktop. That is the realistic minimum for it to be worth doing.
What worktop suits a utility?
Laminate or quartz. Timber will suffer around a sink and behind a washing machine where it gets repeated splashes and steam.
Can I dry clothes in there?
Yes, with a ceiling-mounted airer or a pull-down rail, and an extract fan on a humidistat. Drying clothes in a sealed room is how you get mould on the ceiling.
What height should the appliance housing be?
Standard 900mm worktop height, with the machines under. Raising them 300mm on a plinth saves your back and is popular, but you lose the worktop run above them.
Do you charge for the survey and drawings?
The measured survey and the quotation are free. If you want fully detailed manufacturing drawings or a 3D visual before committing, that is chargeable and the fee comes off the job if you proceed.
Start with a measurement
Tell us the space in Bedfordshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.