Home › Everything we make › Wall Panelling & Wainscoting › Tyne and Wear
Tyne and Wear · North East
Wall Panelling & Wainscoting in Tyne and Wear
Shaker, board-and-batten or raised panel, set out to the room's real lines.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Tyne and Wear is a county of tyneside flats, Victorian terraces and extensive post-war estate housing. That is exactly the kind of building stock a run of wall panelling has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Walls in Tyne and Wear are rarely square and floors are rarely level. A run of wall panelling that is built in a workshop to a nominal size will show every millimetre of that. We survey first, scribe on site, and finish so the joint line disappears.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £320 per linear metre, fitted |
|---|---|
| Lead time | 3–4 weeks from signed drawings |
| Construction | MR MDF, hand-painted |
| Survey area | All of Tyne and Wear, including Newcastle upon Tyne, Sunderland, Gateshead, South Shields |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Tyne and Wear turns it into a fixed written quote.
Towns we cover
Other joinery for Tyne and Wear
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Wall Panelling & Wainscoting in Tyne and Wear — common questions
Is it fixed to the wall or built as panels?
Both methods work. On a flat wall we fix rails and stiles directly. On an uneven wall a backing board goes on first, which costs a little more but gives a perfectly flat face.
What material do you use?
Moisture-resistant MDF for painted work. It has no grain to raise, takes a crisp arris and will not move. Solid timber panelling is available for a natural finish but needs framing that allows the panels to move.
Will it make the room feel smaller?
It adds 18 to 25mm to the wall, which nobody notices. Visually, painting the panelling the same colour as the wall above makes the room feel larger, not smaller.
Which panelling style suits a modern house?
Board and batten or a simple square shaker grid. Both are geometric and flat, which reads contemporary. Raised and fielded panels look wrong outside a period setting.
Do you work with architects and builders?
Regularly. We can work to your drawings and specification, price from a schedule, and co-ordinate with the main contractor's programme. We are equally happy dealing directly with a homeowner from a rough sketch.
Start with a measurement
Tell us the space in Tyne and Wear — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.