Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeAlcove Units & Shelving › Worcestershire

Worcestershire · Midlands

Alcove Units & Shelving in Worcestershire

Chimney-breast alcoves filled properly, scribed to walls that are never square.

Worcestershire is a county of black-and-white timber framing, Georgian riverside houses and new-build market towns. That is exactly the kind of building stock a run of alcove units has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

The difference between a fitted job and a fitted-looking job is the setting out. For alcove units & shelving in Worcestershire we rod the job first, so what arrives on site already accounts for the bows, the skirting and the ceiling line.

How we build it

Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.

Finish and materials

Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.

Guide pricefrom £550 per linear metre, fitted
Lead time4–5 weeks from signed drawings
ConstructionMDF, hand-painted
Survey areaAll of Worcestershire, including Worcester, Redditch, Kidderminster, Bromsgrove

Want a number now? The indicative price tool gives a range in about a minute. A free survey in Worcestershire turns it into a fixed written quote.

Towns we cover

Other joinery for Worcestershire

All joinery services in Worcestershire →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Alcove Units & Shelving in Worcestershire — common questions

Can you build around existing skirting?

Two options. We scribe the unit over the skirting, which is quick and reversible, or we cut the skirting back and run it into the unit for a flush finish. The second looks much better and is what we would normally recommend.

How far can a shelf span before it sags?

In 18mm MDF, about 800mm loaded with books. Beyond that we either thicken to 25mm, add a front lipping, or put a division in. A bowed shelf is the most common fault in self-built alcove work.

Will they be painted to match the walls?

Usually painted to match either the wall colour, so they recede, or the woodwork colour, so they read as part of the architecture. We spray them in the workshop in any colour you supply a reference for.

Do you need to remove the old units first?

We can strip out existing units and take them away. Make-good to the plaster behind is usually needed and we will tell you at survey whether it is minor filling or a plasterer's job.

Do I need to empty the room before you fit?

Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.

Start with a measurement

Tell us the space in Worcestershire — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote