Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeFitted Wardrobes › North Yorkshire

North Yorkshire · Yorkshire

Fitted Wardrobes in North Yorkshire

Floor-to-ceiling wardrobes built to your wall, not to a flat-pack size.

North Yorkshire is a county of limestone and sandstone cottages, Georgian York townhouses and rural farmhouses. That is exactly the kind of building stock a fitted wardrobe has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

Every fitted wardrobe we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in North Yorkshire, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.

How we build it

Carcass work is birch ply or MR MDF depending on span and load. Face frames and doors are solid hardwood. Everything is machined on the same setting so stiles, rails and reveals line through, and shadow gaps stay parallel from one end of the run to the other.

Finish and materials

Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.

Guide pricefrom £720 per linear metre, fitted
Lead time5–7 weeks from signed drawings
ConstructionTulipwood carcass, painted
Survey areaAll of North Yorkshire, including York, Harrogate, Scarborough, Northallerton

Want a number now? The indicative price tool gives a range in about a minute. A free survey in North Yorkshire turns it into a fixed written quote.

Towns we cover

Other joinery for North Yorkshire

All joinery services in North Yorkshire →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Fitted Wardrobes in North Yorkshire — common questions

Can you fit around a chimney breast or a radiator?

That is one of the main reasons people go bespoke. We build the run in bays that step round the breast, and a radiator is either boxed with a ventilated grille or the run is returned short of it.

Do the doors need handles?

No. Push-to-open catches or a routed finger pull along the top edge give a completely flat front. Handles are easier to live with on heavy full-height doors, and a J-pull rail is a good middle ground.

How much hanging space do I actually need?

As a rule, one metre of double hanging holds around forty shirts or thirty jackets. Long hanging for coats and dresses needs 1,600mm of clear height; short hanging needs 1,050mm, which lets you stack two rails in the same bay. We measure what you own at survey rather than guessing.

Hinged or sliding doors?

Hinged doors give you the whole opening and full-depth shelves. Sliding doors need no swing space, which matters if the bed is close, but they lose around 100mm of internal depth to the track and you can only ever see half the wardrobe at once.

Do you charge for the survey and drawings?

The measured survey and the quotation are free. If you want fully detailed manufacturing drawings or a 3D visual before committing, that is chargeable and the fee comes off the job if you proceed.

Start with a measurement

Tell us the space in North Yorkshire — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote