Home › Everything we make › Hardwood Flooring › Perth and Kinross
Perth and Kinross · Scotland
Hardwood Flooring in Perth and Kinross
Engineered and solid boards, laid and finished to suit the subfloor.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Perth and Kinross is a county of stone-built town houses and rural steadings with substantial period joinery. That is exactly the kind of building stock a hardwood floor has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
A hardwood floor is a permanent part of the building, so it is worth setting out properly. We take the survey, agree the drawings, machine the parts in the workshop and fit in Perth and Kinross in one visit wherever the programme allows.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £240 per linear metre, fitted |
|---|---|
| Lead time | 3-5 weeks from signed drawings |
| Construction | Engineered oak, tongue and groove |
| Survey area | All of Perth and Kinross, including Perth, Crieff, Blairgowrie, Pitlochry |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Perth and Kinross turns it into a fixed written quote.
Towns we cover
Other joinery for Perth and Kinross
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Hardwood Flooring in Perth and Kinross — common questions
Engineered or solid?
Engineered for most situations — it is far more stable across seasons and is the only sensible option over underfloor heating. Solid is fine over a stable timber subfloor in a room without heating below.
How wide should the boards be?
Wider boards suit larger rooms and read more generously; narrow boards suit smaller spaces and are more stable. Over about 220mm wide, engineered construction really matters.
What finish?
Hardwax oil for repairability, lacquer for maximum wear resistance in a hallway. Oil can be patched; lacquer has to be sanded back as a whole floor when it wears through.
What about expansion gaps?
Essential, around the whole perimeter and at thresholds, hidden under the skirting or a bead. A floor laid tight to the wall will buckle in the first humid spell.
Do I need to empty the room before you fit?
Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.
Start with a measurement
Tell us the space in Perth and Kinross — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.