Home › Everything we make › Kitchen Islands › County Down
County Down · Northern Ireland
Kitchen Islands in County Down
A single piece of cabinetry that has to work from all four sides.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
County Down is a county of rendered farmhouses, coastal villas and extensive modern development. That is exactly the kind of building stock a kitchen island has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Every kitchen island we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in County Down, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £1,900 per linear metre, fitted |
|---|---|
| Lead time | 8–10 weeks from signed drawings |
| Construction | Solid oak or painted |
| Survey area | All of County Down, including Bangor, Newry, Downpatrick, Newtownards |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in County Down turns it into a fixed written quote.
Towns we cover
Other joinery for County Down
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Kitchen Islands in County Down — common questions
Is a breakfast bar the same thing?
Not quite. A breakfast bar is usually a raised section or a peninsula attached to a run. A true island is free-standing on all four sides, and every face of it has to be finished.
How much clearance do I need around an island?
1,000mm minimum on every side, 1,200mm on the side with the dishwasher or oven so a door can open with someone standing there. Below 900mm and the room stops working.
What overhang do I need for seating?
300mm of clear knee space for comfortable seating, 250mm as an absolute minimum. Any overhang beyond 300mm in stone needs steel or a bracket underneath.
How much storage does an island give?
A 2,000mm island holds roughly the same as three base units, more if you use full-extension pan drawers rather than cupboards. Drawers are the right answer in an island — nobody wants to kneel in the middle of a room.
Can you match existing joinery in the house?
Yes. We take a profile of the existing skirting, architrave or door and either match it from stock cutters or have a cutter ground so the new work runs identically. Matching an old paint colour is straightforward; matching aged oak takes a sample panel and a couple of attempts, which we build into the programme.
Start with a measurement
Tell us the space in County Down — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.