Home › Everything we make › Kitchen Islands › Dundee and Angus
Dundee and Angus · Scotland
Kitchen Islands in Dundee and Angus
A single piece of cabinetry that has to work from all four sides.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Dundee and Angus is a county of sandstone tenements, jute-era terraces and coastal town housing. That is exactly the kind of building stock a kitchen island has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Every kitchen island we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Dundee and Angus, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Guide price | from £1,900 per linear metre, fitted |
|---|---|
| Lead time | 8–10 weeks from signed drawings |
| Construction | Solid oak or painted |
| Survey area | All of Dundee and Angus, including Dundee, Arbroath, Montrose, Forfar |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Dundee and Angus turns it into a fixed written quote.
Towns we cover
Other joinery for Dundee and Angus
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Kitchen Islands in Dundee and Angus — common questions
How much storage does an island give?
A 2,000mm island holds roughly the same as three base units, more if you use full-extension pan drawers rather than cupboards. Drawers are the right answer in an island — nobody wants to kneel in the middle of a room.
Is a breakfast bar the same thing?
Not quite. A breakfast bar is usually a raised section or a peninsula attached to a run. A true island is free-standing on all four sides, and every face of it has to be finished.
How much clearance do I need around an island?
1,000mm minimum on every side, 1,200mm on the side with the dishwasher or oven so a door can open with someone standing there. Below 900mm and the room stops working.
What overhang do I need for seating?
300mm of clear knee space for comfortable seating, 250mm as an absolute minimum. Any overhang beyond 300mm in stone needs steel or a bracket underneath.
How long does a bespoke job take from order to fitting?
Most fitted furniture runs four to eight weeks from approved drawings to fitting day. Kitchens, staircases and timber windows are longer at eight to fourteen weeks because the components are larger and the finishing schedule is longer. We give you a date band at quotation and confirm the fitting week once the drawings are signed off.
Start with a measurement
Tell us the space in Dundee and Angus — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.