Home › Everything we make › Utility Rooms › Dundee and Angus
Dundee and Angus · Scotland
Utility Rooms in Dundee and Angus
Appliance housing, drying racks and worktop that hides the laundry.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Dundee and Angus is a county of sandstone tenements, jute-era terraces and coastal town housing. That is exactly the kind of building stock a utility room has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Walls in Dundee and Angus are rarely square and floors are rarely level. A utility room that is built in a workshop to a nominal size will show every millimetre of that. We survey first, scribe on site, and finish so the joint line disappears.
How we build it
Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Guide price | from £820 per linear metre, fitted |
|---|---|
| Lead time | 6–8 weeks from signed drawings |
| Construction | Moisture-resistant MDF |
| Survey area | All of Dundee and Angus, including Dundee, Arbroath, Montrose, Forfar |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Dundee and Angus turns it into a fixed written quote.
Towns we cover
Other joinery for Dundee and Angus
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Utility Rooms in Dundee and Angus — common questions
What height should the appliance housing be?
Standard 900mm worktop height, with the machines under. Raising them 300mm on a plinth saves your back and is popular, but you lose the worktop run above them.
How much space does a utility actually need?
A 1,800mm run against one wall houses two machines, a sink and a small worktop. That is the realistic minimum for it to be worth doing.
What worktop suits a utility?
Laminate or quartz. Timber will suffer around a sink and behind a washing machine where it gets repeated splashes and steam.
Can I dry clothes in there?
Yes, with a ceiling-mounted airer or a pull-down rail, and an extract fan on a humidistat. Drying clothes in a sealed room is how you get mould on the ceiling.
How do I pay, and when?
A deposit at order to cover materials, a stage payment when the work leaves the workshop, and the balance on completion after you have inspected the fit. Everything is written into the quotation before you commit.
Start with a measurement
Tell us the space in Dundee and Angus — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.