Home › Everything we make › Fascias & Signboards › Dundee and Angus
Dundee and Angus · Scotland
Fascias & Signboards in Dundee and Angus
Signboard, cornice and blocking, sized to carry the signwriting properly.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Dundee and Angus is a county of sandstone tenements, jute-era terraces and coastal town housing. That is exactly the kind of building stock a shopfront fascia has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Walls in Dundee and Angus are rarely square and floors are rarely level. A shopfront fascia that is built in a workshop to a nominal size will show every millimetre of that. We survey first, scribe on site, and finish so the joint line disappears.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.
| Guide price | from £620 per linear metre, fitted |
|---|---|
| Lead time | 5-7 weeks from signed drawings |
| Construction | Accoya, painted |
| Survey area | All of Dundee and Angus, including Dundee, Arbroath, Montrose, Forfar |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Dundee and Angus turns it into a fixed written quote.
Towns we cover
Other joinery for Dundee and Angus
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Fascias & Signboards in Dundee and Angus — common questions
What is the cornice for?
It throws water off the face of the fascia. Remove it and the signboard gets a permanent wet stripe. On a period frontage it is also the element that ties the shopfront to the building above.
What timber for a painted fascia?
Accoya. It holds paint far longer than softwood because it barely moves with humidity, and paint failure on a fascia is almost always the substrate moving underneath it.
How is the fascia ventilated?
We leave a drained and ventilated cavity behind the board so any moisture that gets past the front face can dry. Sealing a fascia tight to the wall traps water against it.
How deep should a fascia be?
Deep enough that the signwriting has margin above and below — typically 350 to 500mm on a standard frontage. A shallow fascia forces cramped lettering and is the most common reason a new shopfront looks wrong.
Do you charge for the survey and drawings?
The measured survey and the quotation are free. If you want fully detailed manufacturing drawings or a 3D visual before committing, that is chargeable and the fee comes off the job if you proceed.
Start with a measurement
Tell us the space in Dundee and Angus — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.