Home › Everything we make › Fascias & Signboards › Wiltshire
Wiltshire · South West
Fascias & Signboards in Wiltshire
Signboard, cornice and blocking, sized to carry the signwriting properly.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Wiltshire is a county of chalk and flint cottages, Georgian market-town stock and large garrison housing areas. That is exactly the kind of building stock a shopfront fascia has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
A shopfront fascia is a permanent part of the building, so it is worth setting out properly. We take the survey, agree the drawings, machine the parts in the workshop and fit in Wiltshire in one visit wherever the programme allows.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £620 per linear metre, fitted |
|---|---|
| Lead time | 5-7 weeks from signed drawings |
| Construction | Accoya, painted |
| Survey area | All of Wiltshire, including Swindon, Salisbury, Chippenham, Trowbridge |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Wiltshire turns it into a fixed written quote.
Towns we cover
Other joinery for Wiltshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Fascias & Signboards in Wiltshire — common questions
What timber for a painted fascia?
Accoya. It holds paint far longer than softwood because it barely moves with humidity, and paint failure on a fascia is almost always the substrate moving underneath it.
How is the fascia ventilated?
We leave a drained and ventilated cavity behind the board so any moisture that gets past the front face can dry. Sealing a fascia tight to the wall traps water against it.
How deep should a fascia be?
Deep enough that the signwriting has margin above and below — typically 350 to 500mm on a standard frontage. A shallow fascia forces cramped lettering and is the most common reason a new shopfront looks wrong.
What is the cornice for?
It throws water off the face of the fascia. Remove it and the signboard gets a permanent wet stripe. On a period frontage it is also the element that ties the shopfront to the building above.
Can you match existing joinery in the house?
Yes. We take a profile of the existing skirting, architrave or door and either match it from stock cutters or have a cutter ground so the new work runs identically. Matching an old paint colour is straightforward; matching aged oak takes a sample panel and a couple of attempts, which we build into the programme.
Start with a measurement
Tell us the space in Wiltshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.