Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeSliding Door Wardrobes › West Yorkshire

West Yorkshire · Yorkshire

Sliding Door Wardrobes in West Yorkshire

Full-height sliding doors where a hinged door has nowhere to swing.

West Yorkshire is a county of millstone-grit terraces, back-to-backs and substantial Victorian villas. That is exactly the kind of building stock a sliding-door wardrobe has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

Every sliding-door wardrobe we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in West Yorkshire, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.

How we build it

Carcass work is birch ply or MR MDF depending on span and load. Face frames and doors are solid hardwood. Everything is machined on the same setting so stiles, rails and reveals line through, and shadow gaps stay parallel from one end of the run to the other.

Finish and materials

You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.

Guide pricefrom £850 per linear metre, fitted
Lead time6–8 weeks from signed drawings
ConstructionPly carcass, veneered doors
Survey areaAll of West Yorkshire, including Leeds, Bradford, Huddersfield, Wakefield

Want a number now? The indicative price tool gives a range in about a minute. A free survey in West Yorkshire turns it into a fixed written quote.

Towns we cover

Other joinery for West Yorkshire

All joinery services in West Yorkshire →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Sliding Door Wardrobes in West Yorkshire — common questions

Is the floor under the wardrobe carpeted?

We recommend fitting to the subfloor and carpeting up to the unit. Sliding gear needs a flat, firm bottom track, and carpet underneath will compress unevenly and throw the doors out.

Can sliding wardrobes be removed later?

The doors and track come off easily. The carcass is fixed to the wall, so removing it will need making good behind. It is fitted furniture, designed to stay.

Can sliding doors be full height?

Yes, up to about 2,800mm. Above around 2,400mm we move to a heavier gear set and a steel-reinforced stile, because a tall panel that flexes will jam in the track.

Do sliding doors seal against dust?

Not fully — there is always a running clearance. Brush seals on the stiles reduce it a great deal. If dust is a real concern, hinged doors on soft-close hinges are the better choice.

Is bespoke joinery more expensive than a fitted furniture chain?

On a like-for-like specification it is usually comparable, and often less. Chains price a standard carcass and then charge for every deviation. A bespoke maker prices the actual room once. Where bespoke does cost more is in the materials — solid hardwood and sprayed finishes cost more than foil-wrapped board, and they last a great deal longer.

Start with a measurement

Tell us the space in West Yorkshire — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote