Home › Everything we make › Walk-In Dressing Rooms › Hampshire
Hampshire · South East
Walk-In Dressing Rooms in Hampshire
Open hanging, drawer banks and lighting planned around what you actually own.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Hampshire is a county of Georgian naval-town housing, thatched village cottages and extensive modern estates. That is exactly the kind of building stock a walk-in dressing room has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Every walk-in dressing room we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Hampshire, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
You can have it primed for your own decorator, sprayed in any RAL or heritage colour, or left in oiled timber. Oiled finishes can be refreshed at home; sprayed finishes are harder wearing and are what we recommend for kitchens and anything at knee height.
| Guide price | from £900 per linear metre, fitted |
|---|---|
| Lead time | 7–9 weeks from signed drawings |
| Construction | Oak-veneered ply |
| Survey area | All of Hampshire, including Southampton, Portsmouth, Winchester, Basingstoke |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Hampshire turns it into a fixed written quote.
Towns we cover
Other joinery for Hampshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Walk-In Dressing Rooms in Hampshire — common questions
Should there be a window in a dressing room?
Ideally yes, for ventilation. If there is not, an extract fan on a humidistat is worth fitting — a sealed room full of clothes and no air movement is how you get musty fabric.
Can a dressing room be made from a small bedroom?
That is the most common way it happens. A box room of 2.4m by 2.4m makes an excellent dressing room and adds more to how the house lives than a bedroom nobody sleeps in.
How much room do I need for a walk-in?
A single-sided run needs 1,500mm of floor width — 600mm for the units and 900mm to stand and open a drawer. A double-sided run needs 2,300mm minimum. Below that you are better off with a wardrobe wall.
What lighting works best?
LED strip in the underside of each shelf, on a movement sensor, plus a decent ceiling light with a high colour rendering index. Poor colour rendering is why clothes look different once you get downstairs.
Do you work with architects and builders?
Regularly. We can work to your drawings and specification, price from a schedule, and co-ordinate with the main contractor's programme. We are equally happy dealing directly with a homeowner from a rough sketch.
Start with a measurement
Tell us the space in Hampshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.