Home › Everything we make › Walk-In Dressing Rooms › Northamptonshire
Northamptonshire · East Midlands
Walk-In Dressing Rooms in Northamptonshire
Open hanging, drawer banks and lighting planned around what you actually own.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Northamptonshire is a county of ironstone villages, Victorian boot-and-shoe terraces and large new settlements. That is exactly the kind of building stock a walk-in dressing room has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Off-the-shelf units are made to standard sizes and then filled out with scribe strips. Our walk-in dressing room work is cut to the dimensions taken from your Northamptonshire property, so there is no packing, no filler and no gap that opens up in year two.
How we build it
Moisture matters more than most people expect. Timber is conditioned before machining, and anything going into a kitchen, utility or bathroom is specified in materials that will not swell at the bottom edge. That is why the base of a well-made unit still closes cleanly after five winters.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £900 per linear metre, fitted |
|---|---|
| Lead time | 7–9 weeks from signed drawings |
| Construction | Oak-veneered ply |
| Survey area | All of Northamptonshire, including Northampton, Kettering, Corby, Wellingborough |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Northamptonshire turns it into a fixed written quote.
Towns we cover
Other joinery for Northamptonshire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Walk-In Dressing Rooms in Northamptonshire — common questions
Should there be a window in a dressing room?
Ideally yes, for ventilation. If there is not, an extract fan on a humidistat is worth fitting — a sealed room full of clothes and no air movement is how you get musty fabric.
Can a dressing room be made from a small bedroom?
That is the most common way it happens. A box room of 2.4m by 2.4m makes an excellent dressing room and adds more to how the house lives than a bedroom nobody sleeps in.
How much room do I need for a walk-in?
A single-sided run needs 1,500mm of floor width — 600mm for the units and 900mm to stand and open a drawer. A double-sided run needs 2,300mm minimum. Below that you are better off with a wardrobe wall.
What lighting works best?
LED strip in the underside of each shelf, on a movement sensor, plus a decent ceiling light with a high colour rendering index. Poor colour rendering is why clothes look different once you get downstairs.
Do you charge for the survey and drawings?
The measured survey and the quotation are free. If you want fully detailed manufacturing drawings or a 3D visual before committing, that is chargeable and the fee comes off the job if you proceed.
Start with a measurement
Tell us the space in Northamptonshire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.