Bespoke JoineryBespoke-JoineryMade to measure · UK-wide

HomeEverything we makeUnder-Stairs Storage › Cumbria

Cumbria · North West

Under-Stairs Storage in Cumbria

Pull-out drawers and cupboards that use the awkward triangle under a flight.

Cumbria is a county of slate and rendered stone cottages with thick, irregular walls throughout the Lakes. That is exactly the kind of building stock a run of under-stair storage has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.

How we approach it

Every run of under-stair storage we make starts with a site survey and a set of setting-out drawings, not a catalogue page. We measure the opening in Cumbria, check the walls for wind and the floor for fall, then cut a carcass that fits the room you actually have.

How we build it

Hardware is specified to the weight it is carrying, not to a price point. Soft-close runners are rated for the drawer load, hinges are adjustable in three planes, and sliding gear is sized so a full-height door still moves with one finger a decade later.

Finish and materials

Finishing happens in the workshop wherever possible. Sprayed paint gives an even film that brushwork cannot match, and the only work left on site is the final touch-in around scribes and fixings.

Guide pricefrom £950 per linear metre, fitted
Lead time4–6 weeks from signed drawings
ConstructionBirch ply
Survey areaAll of Cumbria, including Carlisle, Barrow-in-Furness, Kendal, Whitehaven

Want a number now? The indicative price tool gives a range in about a minute. A free survey in Cumbria turns it into a fixed written quote.

Towns we cover

Other joinery for Cumbria

All joinery services in Cumbria →

What happens next

Four steps, no surprises

Survey

A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.

Drawings & quote

You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.

Workshop

Parts are machined, assembled and finished under cover while the site carries on with other trades.

Fit & handover

We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.

Straight answers

Under-Stairs Storage in Cumbria — common questions

Can a downstairs loo go under the stairs instead?

Frequently yes, if there is 1,900mm of headroom over the pan position and drainage is reachable. We build the enclosure, door and any vanity; the plumbing is a separate trade.

Can it be made to disappear into the wall?

Yes — push-to-open fronts with no handles, painted the same colour as the wall and scribed to the skirting line. Done properly you have to look twice to see it is there.

What actually fits under a staircase?

More than you think. A typical straight flight gives you three usable zones: a full-height cupboard at the tall end, mid-height pull-outs in the middle, and shallow shoe or wine storage at the low end. Pull-outs are the key — a deep fixed cupboard means crawling in on your hands and knees.

Is there a fire regulation issue?

There can be. If the stair is the only escape route in a house of three storeys or more, the understairs enclosure must be fire-resisting and cannot be used for certain storage. We check this at survey and specify accordingly.

Can you match existing joinery in the house?

Yes. We take a profile of the existing skirting, architrave or door and either match it from stock cutters or have a cutter ground so the new work runs identically. Matching an old paint colour is straightforward; matching aged oak takes a sample panel and a couple of attempts, which we build into the programme.

Start with a measurement

Tell us the space in Cumbria — we’ll tell you what it costs

Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.

CallGet a quote