Home › Everything we make › Under-Stairs Storage › Worcestershire
Worcestershire · Midlands
Under-Stairs Storage in Worcestershire
Pull-out drawers and cupboards that use the awkward triangle under a flight.
- Free measured survey
- Fixed written quote
- Workshop-made, site-fitted
- 10-year workmanship guarantee
- Fully insured
Worcestershire is a county of black-and-white timber framing, Georgian riverside houses and new-build market towns. That is exactly the kind of building stock a run of under-stair storage has to be drawn around, so we allow for it at survey stage rather than on fitting day — walls get checked for wind and plumb, floors for level, and the setting-out is taken from the worst reading, not the best.
How we approach it
Walls in Worcestershire are rarely square and floors are rarely level. A run of under-stair storage that is built in a workshop to a nominal size will show every millimetre of that. We survey first, scribe on site, and finish so the joint line disappears.
How we build it
Timber is chosen for the room it is going into. Painted work is built in tulipwood and moisture-resistant MDF because they hold a crisp arris and take a sprayed finish without grain rise. Where the grain is meant to be seen we use European oak, walnut or ash, with veneers laid so the figure runs continuously across a set of doors.
Finish and materials
Every finished job gets a short handover: what the surface is, how to clean it, and how to adjust a hinge if a door drops after the heating has been on for a season. Adjustment is normal in timber and takes about two minutes once you know which screw to turn.
| Guide price | from £950 per linear metre, fitted |
|---|---|
| Lead time | 4–6 weeks from signed drawings |
| Construction | Birch ply |
| Survey area | All of Worcestershire, including Worcester, Redditch, Kidderminster, Bromsgrove |
Want a number now? The indicative price tool gives a range in about a minute. A free survey in Worcestershire turns it into a fixed written quote.
Towns we cover
Other joinery for Worcestershire
What happens next
Four steps, no surprises
Survey
A joiner visits, measures the opening, checks for level and plumb, and talks through how you want to use the space.
Drawings & quote
You get a setting-out drawing and a fixed written price. Nothing is ordered until you have approved both.
Workshop
Parts are machined, assembled and finished under cover while the site carries on with other trades.
Fit & handover
We fit, scribe, adjust and touch in, then walk you through care and adjustment before we leave.
Straight answers
Under-Stairs Storage in Worcestershire — common questions
How heavy can a pull-out unit be?
The runners we use are rated to 70kg per pair loaded. A tall pull-out full of coats and boots will get close to that, so the carcass is built in 18mm ply rather than MDF.
Will it work on a winder or curved stair?
Yes, but it takes more setting out and each unit is a different shape. Expect the price per metre to be higher than a straight flight.
Do you have to remove the existing cupboard door?
Usually yes. The standard builder's door under a stair wastes most of the volume behind it. Replacing it with a bank of pull-outs typically doubles what you can store and reach.
Can the meter or consumer unit stay accessible?
It has to. We build a removable or hinged access panel so the meter reader and an electrician can get to it without dismantling the joinery.
Do I need to empty the room before you fit?
Clear the working wall and anything fragile. We bring dust sheets and a vacuum-extracted saw, but fitting makes dust and we would rather your furniture was out of the way. For kitchens we will agree a sequence with you so you keep a sink and a kettle for as long as possible.
Start with a measurement
Tell us the space in Worcestershire — we’ll tell you what it costs
Every quote starts with a free measured survey, so the price you get is the price you pay. No deposit is taken until you have drawings you are happy with.